Monday, November 22, 2010

Silencer Exhaust painting #10

Took the exhaust/silencer (muffler) off last week end and sprayed it up with VHT black paint
VHT will withstand temps up to 1500 degrees F.
The paint, or similar from Halfords etc. is also available from Car builder solutions web site below. 
One can of  black Exhaust (2004) was £8.50 + PP about £10.50 total and it
arrived the next day.  I found the person on the phone very helpful. All I
did was clean up with emery cloth and spray.  I did the spraying outside on a
calm day.  I then ground ran the engine to do the curing.  Seems to have
worked ok.
http://www.nfauto.co.uk/

Or aluminium sprayed (by RFI screening, they advertise in the BMAA and PFA magazines)

3 comments:

  1. Hello!!.... This post is likeable, and your blog is very interesting, congratulations.

    Car Exhaust Muffler

    ReplyDelete
  2. Hello!!.... This post is likeable, and your blog is very interesting, congratulations.

    Exhaust Silencers

    ReplyDelete
  3. Just some advice from an old welder... Its better for you to start at the top and work your way down.. When you reach the bottom, switch to the other side and work your way down again. If you're local in Uk and you are looking for a decent garage I can recommend Many Autos is the best. I've been bringing my cars here for the last year and never had any cause for complaint.

    ReplyDelete